How to lay and install square carpets when choosing office carpets?

The common way to lay carpets in the office is still to use square carpets. When choosing office carpets, the most popular option is still square carpets. So, how should we lay square carpets and what are their benefits?

1. The pavement requires a high level of flatness: due to the appropriate thickness and squareness of the carpet tiles, if they are laid on uneven surfaces, joint marks will inevitably appear.

2. Select the starting point: Based on the width of the room and the paving plan, after calculation, ensure that the carpet laid to the surrounding corners has a certain total width (20-50cm). Therefore, the starting point is generally not close to any wall corner. Place ink lines on the starting point here and snap two intersecting middle and long lines, ensuring a diagonal angle at the junction. Then, lay the pavement on all four sides here.

3. Pay attention to specificity: Each carpet has a copied arrow symbol on the back, reflecting the same direction of the carpet surface tufting. When laying, pay attention to maintaining consistency in direction along the arrow symbol. Even carpets of the same color and batch number can only be laid in completely consistent directions to avoid visual effect color deviation. Therefore, a fully aligned patchwork blanket can achieve the visual impact of a large wave full blanket. If you need unique attributes or design features based on some carpet patterns (such as standard patterned carpet surfaces), you can also choose block by block vertical paving.

4. Tighten one piece by one: If the road surface is leveled, the four starting points of the pavement should have an angle at one point, and any four pieces that continue to be laid should have an angle at one point. Otherwise, it's not because the specifications or viewing angle of the blanket are not good, or because the paving is too loose, there will definitely be joint problems, which should be repaired.

5. Imitation cutting: Suitable cutting should be carried out according to the shape of the wall corner and column head to achieve a tightly closed actual effect.

6. Fixed and immovable edges for external opening: When paving the doorstep or other external opening edges, a special type of carpet edge decoration strip should be selected for closure.