Hello, welcome to Mengdian Carpet's website!
Hotline
+86  0531-84780927

Contact Us

Contact: Ms. Snow
Tel: +86 0531-84780927
Fax: +86 0531-84780927
Mob/Whatsapp/Wechat: 
+86 15940956637
E-mail: snow@jblcarpet.com
Web site: http://www.jblcarpet.com/
Address: Yuan Li village, Sun Ji Town, Shanghe, Ji'nan, Shandong.
Current Location:HomePage> News

What are the key points of carpet surface construction quality control

* 来源: * 作者: admin * 发表时间: 2021/07/30 15:03:00 * 浏览: 0
Key points of carpet surface construction quality control:

1) The surface of the base course must be flat, free of pits, pits and cracks, and kept clean. The uneven parts shall be filled and leveled with cement mortar in advance;

2) After cutting, each section of carpet shall be about 20mm longer than the length of the room. The width shall be calculated according to the size after cutting the edge of the carpet, and snap the line to cut the edge part;

3) When fixing the carpet with wooden strips, the strips shall be fixed on the base course along the room with a distance of 10-20mm from the wall corner;

4) The carpet is the back joint, which shall be glued with thread seam or adhesive tape. The joint shall be firm and flat. After the joint is completed, repair the fluff at the front of the carpet interface with an electric shovel;

5) Use the tensioner to push and stretch the carpet section by section in the vertical and horizontal direction to make it tight and flat. The thrust should be appropriate. It is easy to tear the carpet if it is too large. If it is too small and uneven, the pushing should be carried out step by step; When laying movable carpet, the cross control block shall be laid in the middle of the room according to the cross line, and then laid around according to the cross control block.

Jinan Mengdian carpet Co., Ltd. is a zero emission environmental protection enterprise invested and built by Beijing Mengdian carpet Co., Ltd., which has more than 20 years of experience in carpet production. The company is located in the industrial park of Sunji town. The construction of the industrial park covers an area of 200 mu. It has two independent brands of "JinBiLun" and "Oriental Tiger", with more than one third of the domestic market share. The main equipment is provided by equipment manufacturers such as British corbel, American MC company, Belgium vanderville company and Germany Neumag company. The designed annual output is 12 million square meters, the annual output value is 1.1 billion, profits and taxes are 150 million, and there are 1500 employees.